Drop X Fostex X00 Measurements

Dekoni Audio is pleased to share a “deep dive” look into our Fostex TH-X00 Premium line of Earpads, specifically tuned to elevate your listening experience. 

We start with comfort, using our soft, high density, slow rebound memory foam for an extra plush experience that conforms to the shape of your face (and accommodates glasses stems). Like all our earpads, they are offered in a wide range of fabric options, including Elite Sheepskin, Elite Fenestrated Sheepskin, Elite Velour, and our Elite Hybrid pads. We also have Fostex TH-X00 available in Platinum Protein Leather, made from eggshell proteins.  We ensured the pads mount just as securely as the stock pads. Finally, we shaped and measured the pads to tune the sound and share a preview of how they sound compared to stock pads.

In our measurements, we aren’t using compensation except to cancel out the ear response of our microphone dummy head. We have been fortunate to have acquired a certain well-known Audio Precision-based measurement rig, and will continue to keep the measurements coming! Some measurements by others are made with adjustments to reflect the effect that the shape of a generic inner and outer ear will have on the sound waves – we don’t do that, because as every experienced audio enthusiast knows, we all have different ears! So, as part of a series of Dekoni Describes posts, we will walk our readers through understanding our graphs.

Dekoni TH-X00 Compared

The first thing to understand about an uncompensated graph is that it will sound different to the listener than the graph will show. For one, we haven’t smoothed our graphs, so there are many peaks and valleys that would have been lost information, but also there are other factors, such as the human’s extra sensitivity to vocals, and that the shape of our ears and depth of our ear canals can actually amplify certain frequencies. For the purposes of swapping earpads, it is enough to say that a flat line along the 0 dB line wouldn’t sound “good” on these uncompensated graphs, and mainly we want to focus on how a Dekoni pad compares to the Stock pad. With our measurements, we used the Fostex x Massdrop TH-X00 Purpleheart, which comes Stock with Fostex’s Pleather.

We use supple, natural Sheepskin that is the softest and most breathable available today, available in solid or Fenestrated (French for “windowed,” it has little holes in it). With our solid Sheepskin, overall we see a similar shaped frequency response and only up to a 4 dB deviation from stock, where the biggest change is a bit less energy around the 2-4 kHz range. Keep in mind the little “bowl” in the midrange between 1kHz and 5 kHz is normal, because without it, vocals would sound “shouty” and louder than the extended frequencies!

Dekoni TH-X00 Sk

Dekoni TH-X00 FnSk

Our Fenestrated Sheepskin is also similar in shape to the stock pad, though the midrange is elevated and more “forward” relative to stock, except near 3k-4k Hz which is very close to stock. This creates a more intimate presentation, great for people who enjoy Bio-Cellulose drivers yet wish for a more upfront presentation that focuses on vocals, guitars, violins, and ought to please the band Oppenheimer (check out their album names). Fenestrations are also airy in that they allow some more heat to escape through the pads.

Our Elite Velour has a higher thread count and tighter weave than typical velour pads, soft and breathable but as you can see there is no loss of foundational bass – in fact it traces very similar to the Fenestrated Sheepskin pads on this headphone, with just a bit less mids energy. In fact, this is a great opportunity to choose based on your comfort preference for cloth or leather, contrary to most velours which lose low end and high end pitch quantity that leave a bare midrange.

Dekoni TH-X00 Vlr

Dekoni TH-X00 Hyb

Our Hybrid pads, which are sealed with solid Sheepskin on the outside face, neutral Fenestrated Sheepskin on the inner face, and comfortable with Velour on the face facing your face, measure the closest to TH-900 stock pads, though it has a smaller peak around 8 kHz, and a similar 4dB drop around the 3k-4k Hz midrange. This pad is a great option if you want to keep as much of the stock sound as possible, while having cloth touching your skin.

Dekoni’s Protein Leather is an economical alternative to animal hides, as it is made from eggshell protein, and has a thinner weight and a more even grain structure than the Sheepskin. As you can see from the graph, it has a graph shape similar to the Hybrid pads with the changes emphasized just a little more, for a bit of a v-shaped presentation without getting sharp in the upper mids/treble.

Dekoni TH-X00 PL

The subjective factor of experiencing headphones and ear pads matters the most, of course. If it sounds good, it is good! One great feature of Fostex’s pad mount design is the relative ease of changing pads, so pads can be changed on a whim. We listen with our pads for several revisions before release, and we want to thank the reviewers and our patrons on Head-Fi and other platforms who have shared their experiences. Real user experience is the best judge, and we thank everyone who has tried to describe their experience!

Dekoni TH-X00 pads attach to the Fostex TH-900 mk1 and mk2, TH-909, TH-600 and 610, Drop.com’s TH- and TR-X00 of every wood variety, as well as headphones from other companies such as Denon D7000, D5000, D2000 and EMU Teak. Dekoni DT pads are available now at our fine dealers internationally and dekoniaudio.com.